Views: 7 Author: Site Editor Publish Time: 2019-05-31 Origin: Site
There are some common problems when using smart household water meter. Here are some solutions for everyone:
First, the household water meter is not owed but the water is stopped:
Sometimes there are two reasons for the water shortage in the household water meter, but there are two reasons for the water cut: one is that the battery of the household water meter is dead, and the water meter can be used again when the battery is replaced in time; the other is the household water meter. Suffering from the attack, the user needs to re-swipe the IC card to use the water again.
Second, the household water meter payment recharge failed:
On the one hand, because the IC card is not used correctly, the user can re-insert the IC card, and after 10-20s, the water fee is fully charged and then pulled out; on the other hand, the IC card used by the user is not a matching card of the household water meter.
Third, the household water meter does not read the card:
This kind of situation is generally caused by the fact that the foreign matter in the card slot causes the card not to be read. The user needs to take out the foreign object in time to read the data normally.
Fourth, the household water meter electronic display failure:
This situation is generally caused by a short circuit in the electronic control part of the household water meter, and the technician is notified to replace the display screen.