E-mail: info@smeters.com    WhatsApp: +86-13131984716
You are here: Home » News » Product quality » The water meter is installed backwards, can the meter count be reversed?

Contact

ADDRESS

 Ximei Huajie building, Qiaoxi District, Shijiazhuang city, Hebei, China

E-MAIL

TELEPHONE

 86-0311-66568000
 0086-13131984716
 0086-13131984716

The water meter is installed backwards, can the meter count be reversed?

Views: 5     Author: Site Editor     Publish Time: 2022-04-24      Origin: Site

The water meter is installed backwards, can the meter count be reversed?


smart water meter

The IC card smart water meter shows that there is water, but no water is released. What are the reasons?

1. The front valve of the water meter inlet is not opened. You can manually open the front valve of the water meter to try. If there is still no water, then you need to find the relevant department to carry out the following detailed inspection.

2. Whether the filter screen is blocked, if there is foreign matter, clean the filter screen of the faucet, and then install it and test whether the water is normal.

3. The IC card smart water meter is interfered by magnetic substances. Once the IC card smart water meter senses the magnetic substance attack, it will send out a water cut signal to indicate that the water meter is under attack. At this time, it is necessary to find the source of interference and keep the interference source away from the water meter.

4. The power of the IC card smart water meter is too low. When the battery power of the IC card smart water meter used is too low, the water meter will issue a relative alarm and stop the water supply while closing the valve. It is necessary to notify the staff in time to replace the water meter battery. Work.

5. The remaining water bill of the IC card smart water meter is too low. Usually, after the water meter is installed, a predetermined value will be set for it in advance. When the remaining value is lower than this preset value, an alarm warning will be issued and the supply of water resources will be stopped. , to warn users that the water bill is too low.

6. The IC card smart water meter fails. When the IC card smart water meter fails, a relative error code will appear on the electronic display screen, and the corresponding processing needs to be carried out according to the prompt code.

lADPJxf-wx_YajLNASrNApI_658_298

smart water meter

The water meter is installed backwards, can the meter count be reversed?

 If the water meter has an anti-reverse function, the water meter can be used normally. If not, the meter numbers will be reversed from 0000/9999/9998. The internal structure of the traditional water meter can be divided into three parts: shell, sleeve and inner core from the outside to the inside. The shell is cast iron, and after the water comes out of the water inlet, it passes through the lower annular space of the shell, which is called the "lower annular chamber" here. Above this annular space, there is an "upper ring chamber" that communicates with the water outlet. There is a filter screen with small holes at the bottom of the sleeve to filter out the sundries in the water.


CONTACT US

info@smeters.comMobile: 0086-13131984716
Whatsapp: 0086 13131984716
Fixed line 86-0311-66568000
Address: Ximei Huajie building, Qiaoxi District, Shijiazhuang city, Hebei, China
Email: info@smeters.com
Skype: nancy.05310
 
Powered by: XIAOCHENG
Copyright © 2004 - 2019 hebei shanghong water meter technology Co., Ltd | Sitemap