 |
| Matière : | |
|---|---|
| R: | |
| couleur: | |
| Type d'extrémité de filetage : | |
| Norme: | |
| Quantity: | |
Compteur D'eau à Jets Multiples Corps en Laiton
TYPE JETS MULTIPLES
Compteur D’eau à Cadran Sec Corps en Laiton
Dimension: DN15-DN50
Dimension globale et poids
| DN(mm) | 15 | 20 | 25 | 32 | 40 | 50 | 50 |
Dimension(pouce) | 1/2" | 3/4" | 1" | 1-1/4" | 1-1/2" | 2" | 2" |
Longeur (L | 165/190 | 190 | 260 | 260 | 300 | 300 | 280 |
Largeur (L) | 98 | 98 | 103.5 | 103.5 | 125 | 125 | 160 |
| Hauteur (H) | 116 | 117 | 124 | 124 | 162 | 162 | 187.5 |
Connexionfiletée D | G3/4B | G1B | G11/4B | G11/2B | G2B | G21/2B | Flange end |
Caractéristiques
Conduite magnétique, résistance de transmission inférieure..
Bouclier magnétique, pour la protection contre les champs magnétiques externes..
Le registre sec scellé assure une lecture claire de longue durée.
Dispositif de régulation externe.
Accessoires : 2 pièces d'accouplement, 2 écrous d'accouplement et 2 pièces de rondelles.
Caractéristiques optionales
Type de registre scellé : type sec ; Type semi-sec ; Type super sec.
Ratio: R=80 ; 100; 125; 160.
Dimension: 15~50mm.
Eau froide / chaude.
Clapet anti-retour..
Option de commutateur Reed.
Plusieurs longueurs et raccords disponibles sur demande.
Type d'extrémité de filetage : BSP / NPT
Données Techniques
| DN (mm) | 15 | 20 | 25 | 32 | 40 | 50 | |
Dimension (pouce) | 1/2" | 3/4" | 1" | 1-1/4" | 1-1/2" | 2" | |
Q4(l/h) | 3125 | 5000 | 7875 | 12500 | 20000 | 31250 | |
Q3(l/h) | 2500 | 4000 | 6300 | 10000 | 16000 | 25000 | |
| R=80 | Q2 (l/h) | 50 | 80 | 126 | 200 | 320 | 400 |
Q1 (l/h) | 31.25 | 50 | 78.75 | 125 | 200 | 250 | |
| R=100 | Q2 (l/h) | 40 | 64 | 100.8 | 160 | 256 | 400 |
Q1 (l/h) | 25 | 40 | 63 | 100 | 160 | 250 | |
| R=125 | Q2 (l/h) | 32 | 51.2 | 80.64 | 128 | 204.8 | 200 |
Q1 (l/h) | 20 | 32 | 50.5 | 80 | 128 | ||
| R=160 | Q2 (l/h) | 22.5 | 40 | 63 | 100 | 160 | 400 |
Q1 (l/h) | 15.62 | 25 | 39.37 | 62.5 | 100 | 250 | |
Lecture Max. (m3) | 99,999 | 99,999 | 99,999 | 99,999 | 99,999 | 99,999 | |
Lecture Min. (Litre) | 0.05 | 0.05 | 0.05 | 0.05 | 0.05 | 0.05 | |
Pression Max. (Bar) | 16 | 16 | 16 | 16 | 16 | 16 | |
Perte de charge (⊿P) | 63 | ||||||
Température Max. | T=50 /90 | ||||||
| Option de sortie d’impulsion | Vmax=24V | ||||||
Imax=100mA | |||||||
Erreur maximale tolérée
Dans la zone inférieure de qmin inclus jusqu'à mais excluant qt est de ±5 %.
Dans la zone supérieure de qt inclus jusqu'à et y compris qs est ±2 % ; ±3% pour compteur d'eau chaude.
Conformité aux normes
Les données techniques sont conformes à la norme internationale ISO 4064.
Conditions de travail
Température de l’eau: 0.1℃～40℃pour compteur d’eau froide.
0.1℃～90℃pour compteur d’eau chaude.
Pression de l’eau: ≤1.6Mpa (16 bar).
Pulse Output Option
| Position de l’aimant | Litre /Pulse |
| *0.0001 | 1 |
| *0.001 | 10 |
| *0.01 | 100 |
| *0.1 | 1000 |
Garantie
Tous les compteurs seront garantis contre les défauts de fabrication et de matériaux pendant une période d'un (1) an à compter de la date de réception. Les compteurs ou les pièces défectueux découverts au cours de cette période
doivent être remplacés sans frais lors du retour chez SH-MECH.
MULTI-JET TYPE
Dry-dial Brass Body Water Meters
Application
Measuring the volume of cold (hot) water passing through the pipeline.Water meter is used for home,commercial,municipality,pipeline
Features
·Magnetic Drive, Lower transmission resistance.
·Magnetic shield, for external magnetic field protection.
·Sealed dry register ensures long time clear reading.
·External regulating device.
Accressories: 2pcs coupling, 2pcs coupling nuts and 2pcs washers.
·With high accuracy
·For horizontal use
·Accessories include Strainer, Rotary piston, Connection Widget, connector fitting
Optional Features
·Register sealed type: Dry type; Semi-dry type; Super-dry type.
·Accuracy: R=80 ; 100; 125; 160;class b;class c.
·Size: 15~50mm.
·Cold water.
·Non return valve.
·Reed switch option.
·Several lengths and connections availavle on request.
·Thread end type: BSP / NPT.
·Materials: Brass,Brass interface,Brass material
·Brass working pressure: PN16(16bar)
·Provide pulse output/rs485 modbus/wired remote/pulse splitter/pulse read display
Maximum Permissible Error
·In the lower zone from qmin inclusive up to but excluding qt is ±5%.
·In the upper zone from qt inclusive up to and including qs is ±2%; ±3% for hot water meter.
Standards Compliance
Technical data conform to international standard ISO 4064.
Working Conditions
·Water temperature: 0.1℃~50℃ for cold water meter.
·Water pressure: ≤1.6Mpa (16 bar).
Overall Dimension And Weight
| DN(mm) | 15 | 20 | 25 | 32 | 40 | 50 | 50 |
| Size(inch) | 1/2" | 3/4" | 1" | 1-1/4" | 1-1/2" | 2" | 2" |
| Length(L) | 165/190 | 190 | 260 | 260 | 300 | 300 | 280 |
| Width(W) | 98 | 98 | 103.5 | 103.5 | 125 | 125 | 160 |
| Height(H) | 116 | 117 | 124 | 124 | 162 | 162 | 187.5 |
| Connecting Thread D | G3/4B | G1B | G11/4B | G11/2B | G2B | G21/2B | Flange end |
| Weight(kgs) | 1.65 | 1.79 | 1.85 | 2.68 | 5.25 | 7.25 |
Pulse Output Option
| Magnet Position | Liter/Pulse |
| *0.0001 | 1 |
| *0.001 | 10 |
| *0.01 | 100 |
| *0.1 | 1000 |
Warranty
All meters will be guaranteed against defects in workmanship and materials for a period of one (1) year from the date of acceptance. Defective meters or parts discovered within this period shall be replaced without charge upon return to the SHMETERS
To better ensure the safety of your goods, professional, environmentally friendly, convenient and efficient packaging services will be provided.
You need a good solution for water metering---Catering all your needs.
As the China's professional manufacturer and distributor since 2013, we have developed a comprehensive water meter range and a complete solution for the Commercial ,agriculture, Industrial and Domestic market on Mechanical type water meter and smart water meters. Moving with the changes in technology and precision metering has been the mission of the company since its genesis and we are adding metering that can support water sustainability using. Since 2017, we start the export smart water meters to the whole world, and hope more and more countries and region people can save the water with us together with the smart technology and system. Nowadays, SHMETERS have already become one the main important exporter for water flow meters in China.
We will provide your product to your hand in timely manner and keep you informed of process with your order throughout the whole sales. From the strictly QC inspection, strictly cost control and five star quality services, we believe that you will own a more solution on water metering.
Compteur D'eau à Jets Multiples Corps en Laiton
TYPE JETS MULTIPLES
Compteur D’eau à Cadran Sec Corps en Laiton
Dimension: DN15-DN50
Dimension globale et poids
| DN(mm) | 15 | 20 | 25 | 32 | 40 | 50 | 50 |
Dimension(pouce) | 1/2" | 3/4" | 1" | 1-1/4" | 1-1/2" | 2" | 2" |
Longeur (L | 165/190 | 190 | 260 | 260 | 300 | 300 | 280 |
Largeur (L) | 98 | 98 | 103.5 | 103.5 | 125 | 125 | 160 |
| Hauteur (H) | 116 | 117 | 124 | 124 | 162 | 162 | 187.5 |
Connexionfiletée D | G3/4B | G1B | G11/4B | G11/2B | G2B | G21/2B | Flange end |
Caractéristiques
Conduite magnétique, résistance de transmission inférieure..
Bouclier magnétique, pour la protection contre les champs magnétiques externes..
Le registre sec scellé assure une lecture claire de longue durée.
Dispositif de régulation externe.
Accessoires : 2 pièces d'accouplement, 2 écrous d'accouplement et 2 pièces de rondelles.
Caractéristiques optionales
Type de registre scellé : type sec ; Type semi-sec ; Type super sec.
Ratio: R=80 ; 100; 125; 160.
Dimension: 15~50mm.
Eau froide / chaude.
Clapet anti-retour..
Option de commutateur Reed.
Plusieurs longueurs et raccords disponibles sur demande.
Type d'extrémité de filetage : BSP / NPT
Données Techniques
| DN (mm) | 15 | 20 | 25 | 32 | 40 | 50 | |
Dimension (pouce) | 1/2" | 3/4" | 1" | 1-1/4" | 1-1/2" | 2" | |
Q4(l/h) | 3125 | 5000 | 7875 | 12500 | 20000 | 31250 | |
Q3(l/h) | 2500 | 4000 | 6300 | 10000 | 16000 | 25000 | |
| R=80 | Q2 (l/h) | 50 | 80 | 126 | 200 | 320 | 400 |
Q1 (l/h) | 31.25 | 50 | 78.75 | 125 | 200 | 250 | |
| R=100 | Q2 (l/h) | 40 | 64 | 100.8 | 160 | 256 | 400 |
Q1 (l/h) | 25 | 40 | 63 | 100 | 160 | 250 | |
| R=125 | Q2 (l/h) | 32 | 51.2 | 80.64 | 128 | 204.8 | 200 |
Q1 (l/h) | 20 | 32 | 50.5 | 80 | 128 | ||
| R=160 | Q2 (l/h) | 22.5 | 40 | 63 | 100 | 160 | 400 |
Q1 (l/h) | 15.62 | 25 | 39.37 | 62.5 | 100 | 250 | |
Lecture Max. (m3) | 99,999 | 99,999 | 99,999 | 99,999 | 99,999 | 99,999 | |
Lecture Min. (Litre) | 0.05 | 0.05 | 0.05 | 0.05 | 0.05 | 0.05 | |
Pression Max. (Bar) | 16 | 16 | 16 | 16 | 16 | 16 | |
Perte de charge (⊿P) | 63 | ||||||
Température Max. | T=50 /90 | ||||||
| Option de sortie d’impulsion | Vmax=24V | ||||||
Imax=100mA | |||||||
Erreur maximale tolérée
Dans la zone inférieure de qmin inclus jusqu'à mais excluant qt est de ±5 %.
Dans la zone supérieure de qt inclus jusqu'à et y compris qs est ±2 % ; ±3% pour compteur d'eau chaude.
Conformité aux normes
Les données techniques sont conformes à la norme internationale ISO 4064.
Conditions de travail
Température de l’eau: 0.1℃～40℃pour compteur d’eau froide.
0.1℃～90℃pour compteur d’eau chaude.
Pression de l’eau: ≤1.6Mpa (16 bar).
Pulse Output Option
| Position de l’aimant | Litre /Pulse |
| *0.0001 | 1 |
| *0.001 | 10 |
| *0.01 | 100 |
| *0.1 | 1000 |
Garantie
Tous les compteurs seront garantis contre les défauts de fabrication et de matériaux pendant une période d'un (1) an à compter de la date de réception. Les compteurs ou les pièces défectueux découverts au cours de cette période
doivent être remplacés sans frais lors du retour chez SH-MECH.
MULTI-JET TYPE
Dry-dial Brass Body Water Meters
Application
Measuring the volume of cold (hot) water passing through the pipeline.Water meter is used for home,commercial,municipality,pipeline
Features
·Magnetic Drive, Lower transmission resistance.
·Magnetic shield, for external magnetic field protection.
·Sealed dry register ensures long time clear reading.
·External regulating device.
Accressories: 2pcs coupling, 2pcs coupling nuts and 2pcs washers.
·With high accuracy
·For horizontal use
·Accessories include Strainer, Rotary piston, Connection Widget, connector fitting
Optional Features
·Register sealed type: Dry type; Semi-dry type; Super-dry type.
·Accuracy: R=80 ; 100; 125; 160;class b;class c.
·Size: 15~50mm.
·Cold water.
·Non return valve.
·Reed switch option.
·Several lengths and connections availavle on request.
·Thread end type: BSP / NPT.
·Materials: Brass,Brass interface,Brass material
·Brass working pressure: PN16(16bar)
·Provide pulse output/rs485 modbus/wired remote/pulse splitter/pulse read display
Maximum Permissible Error
·In the lower zone from qmin inclusive up to but excluding qt is ±5%.
·In the upper zone from qt inclusive up to and including qs is ±2%; ±3% for hot water meter.
Standards Compliance
Technical data conform to international standard ISO 4064.
Working Conditions
·Water temperature: 0.1℃~50℃ for cold water meter.
·Water pressure: ≤1.6Mpa (16 bar).
Overall Dimension And Weight
| DN(mm) | 15 | 20 | 25 | 32 | 40 | 50 | 50 |
| Size(inch) | 1/2" | 3/4" | 1" | 1-1/4" | 1-1/2" | 2" | 2" |
| Length(L) | 165/190 | 190 | 260 | 260 | 300 | 300 | 280 |
| Width(W) | 98 | 98 | 103.5 | 103.5 | 125 | 125 | 160 |
| Height(H) | 116 | 117 | 124 | 124 | 162 | 162 | 187.5 |
| Connecting Thread D | G3/4B | G1B | G11/4B | G11/2B | G2B | G21/2B | Flange end |
| Weight(kgs) | 1.65 | 1.79 | 1.85 | 2.68 | 5.25 | 7.25 |
Pulse Output Option
| Magnet Position | Liter/Pulse |
| *0.0001 | 1 |
| *0.001 | 10 |
| *0.01 | 100 |
| *0.1 | 1000 |
Warranty
All meters will be guaranteed against defects in workmanship and materials for a period of one (1) year from the date of acceptance. Defective meters or parts discovered within this period shall be replaced without charge upon return to the SHMETERS
To better ensure the safety of your goods, professional, environmentally friendly, convenient and efficient packaging services will be provided.
You need a good solution for water metering---Catering all your needs.
As the China's professional manufacturer and distributor since 2013, we have developed a comprehensive water meter range and a complete solution for the Commercial ,agriculture, Industrial and Domestic market on Mechanical type water meter and smart water meters. Moving with the changes in technology and precision metering has been the mission of the company since its genesis and we are adding metering that can support water sustainability using. Since 2017, we start the export smart water meters to the whole world, and hope more and more countries and region people can save the water with us together with the smart technology and system. Nowadays, SHMETERS have already become one the main important exporter for water flow meters in China.
We will provide your product to your hand in timely manner and keep you informed of process with your order throughout the whole sales. From the strictly QC inspection, strictly cost control and five star quality services, we believe that you will own a more solution on water metering.
